|
StyleCAD's Grading Options:
StyleCAD gives the user the below options to grade
using:
The
Grading Panel, using only the mouse
Keyboard
Grading.
Rule
Libarary.
Plus a combination of the above with the below options:
- Auto
Blend Grading;
normally on as the default but in the Pattern Property window, turn off
the Auto Blend Grading Data and grading can be fined tuned between a
grade point and intermediate point. Also by turning on all points, the
Drag Grading tool can be used to move intermediate points around the
curve on all required sizes. The different types of grading can also be
chosen by the user from the Point property window .
- Multi
Point Grading;
Hold down the Shift key and click on points or drag around the
points .
- Copy
Previous Grading;
click on the Copy Previous button if the next point to grade is the same
or use Control-C to copy & Control-V to paste from one grade point
to any other .
- Grading
Ratio;
this can be typed into the Grading Panel and turned on when required to
save having to input an uneven grade ratio. E.g. a half grade .
- Grading
Pattern Annotations
may be graded along with the rest of the pattern .
-
- Grade
Maintain Curvature
allows the user to control the graded curve. Auto Blend Grading Data
must be turned off.
- Curve
Lock Grading;
grading so the curve does not change, e.g. lock one side of an arm
hole.
- Automatic
Grading;
Any graded pattern can be registered to the AutoGrade and then used to
automatically grade other patterns from then on.
- Grading
Axis;
is a horizontal/vertical measurement grading tool. Just click the centre
point to change the axis.
- Non
Linear Grading;
tick on in the Grading Panel and an irregular grade can be changed
without affecting the irregular amount.
- Copy
Grading Tool;
is used to store and copy the grading from a point to another point or
points + simply control c, v.
- Drag
Grading;
to drag an individual size without changing other sizes.
- Intermediate
Grading;
to automatically grade curves from multiple patterns combined as one,
the user only has to grade the two outside points.
- Radial
Grading Tool;
to grade curve and radial patterns/shapes.
- Perimeter
Grading;
to grade by simply entering the desired distance and the section is
automatically graded.
- Group
Grading
(Advanced PDS Feature); Grading can be distributed over a group of
patterns that will be sewn together.
Contact
info@stylecad.com for more information.
|
|
StyleCAD.com - Inspired By Dreams
Problems, comments, or need additional information?
Contact us.
Copyright 2003-2006 SoftFashion, Inc. All rights reserved.
|